I wanted to create a 'one stop shop' for all the Graphics and D&T projects that you D&T teachers out there need - Please get in touch if you need something and I will see if i can make it up for you! Stay safe, y'all!
I wanted to create a 'one stop shop' for all the Graphics and D&T projects that you D&T teachers out there need - Please get in touch if you need something and I will see if i can make it up for you! Stay safe, y'all!
D&T Evaluation Worksheets
The reason behind these sheets:
I was getting frustrated with how difficult it was to get students to ‘evaluate’, rather than ‘describe’, as they often did in the D&T project evaluations. The emphasis in these worksheets is to get the student thinking and explaining by answering questions about every stage of the ‘design and make’ process. This has helped them learn the meaning of evaluation through the process of asking reflective questions.
Learning Outcomes:
In this lesson, students will gain an understanding of:
Clear success criteria to guide students on what constitutes a good outcome
Evaluation questions for every part of a ‘design and make’ project, including research methods, Design Process, Mock ups/prototype stage, Manufacture process, CAD/CAM process, including testing and conclusion
How to structure their response in complex sentences, using P.E.E., supported by using differentiated materials.
Power point:
The attractive and visual power point can be used on the white board and also printed as a worksheet, as can the question slide
Power point Worksheets/categories:
The worksheets are differentiated into two categories, so that students who have learning difficulties (LA) will not be overwhelmed and will have much more literacy support with sentence stems.
The second category that caters to the middle and higher ability student has differentiation in the form of more open ended tasks as well as ‘Challenges’. I have left super challenges blank so a student can fill this in themselves to be more independent!
In theory, one sheet could be used to support the other, or even used for lower school VS. upper school evaluations
Please leave a positive review if this helped, thank you!
Power point:
The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included.
A lesson plan is also included (MS Publisher file).
Learning Outcomes:
In this lesson, students will gain an understanding of:
• Developing their drawing and visualising skills, increasing their ability to draw freehand more quickly and confidently.
• 5 different major activities, including a Super challenge task.
• The technique used for rendering a range of materials realistically, including; wood, concrete, metal, glass, rubber and plastic
• In-depth knowledge of rendering wood, metal and glass, with step by step guidance on how to get a great outcome
• How to create the illusion that an object is made from a particular material and describe how light falls on it.
• Literacy: Students will also learn a wide range of subject specific key words
Worksheets:
The worksheets are differentiated into two categories:
• ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc.
• The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.
Power point:
The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included.
A lesson plan is also included (MS Publisher file).
Learning Outcomes:
In this lesson, students will gain an understanding of:
• Of how Graphic design is used for branding, typography and colour schemes to create the identity of commercial products
• How to use visual combinations to develop creative and original brand designs
• How to develop an idea, improving and refining the design to make it better.
• Of how to create original branding for a chocolate bar, using an original typography style and a emotive and powerful colour scheme
• How to annotate a design, communicating design decisions and aesthetic.
• Literacy: Students will also learn a range of subject specific key words
Worksheets:
The worksheets are differentiated into two categories:
• ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc.
• The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.
This is an artist worksheet, that includes analysis questions about Van Gogh’s Sunflowers - 1889. This is suitable for lesson, cover, home work or baseline assessment.
On this all in one sheet, there are boxes for students to:
copy and complete a Van Gogh image
write their answers in, discussing the style and life of the artist
Self/teacher assessment with WWW and EBI success criteria provided.
If you found this resource helpful, please leave positive comments, as this really helps. Thank you.
Power point:
The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included.
A lesson plan is also included (MS Publisher file).
Learning Outcomes:
In this lesson, students will gain an understanding of:
• What is two point perspective drawing?
• How to create realistic perspective drawings, with 3 challenges including: basic cubes, letter shapes, to complex city street views
• Literacy: Students will also learn a range of subject specific key words
Worksheets:
The worksheets are differentiated into two categories:
• ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc.
• The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.
The rationale:
As D&T teachers return to school, we need a sit down/non-tool based project to start the students off, due to the Coronavirus.
This 6 x 1 hour lesson mini project is an ‘all in one’ prepared resource, containing lesson by lesson powerpoints and differentiated booklets that can be used by subject specialists and non-D&T teachers alike, perfect for cover work as well. The project ends with a sit down design and make lesson.
Powerpoints:
The project is driven by high end, attractive and informative power points, which have detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included.
Learning Outcomes:
This graphics project is aimed at Year 8 (12 year old) students, who will gain an understanding of how to:
• Lesson 1: Draw in 1 point perspective
• Lesson 2: Draw in 2 point perspective
• Lesson 3: Draw in Isometric projection
• Lesson 4: Rendering the textures of materials
• Lesson 5: Creative Typography
• Lesson 6: Design and make a learning aid (Clock for children)
Project plan:
A scheme of work is also included as a MS Publisher file. This explains the: learning outcomes, starter, main and plenary activities as well as resources required and homework.
Booklets:
The booklets are differentiated into two categories:
• ‘LA’ Booklet having additional support in terms of the outcomes as well as sentence stems, word banks, etc.
• The second category of booklet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.
This is designed to simulate an NEA project, where students will research, design, model, and prototype and evaluate a 3D printed object for a specific target market. This lesson focusses on Styrofoam modelling, creating a more ergonomic handle for a tactile object. The students really enjoyed this lesson and also it is relatively easy to conduct especially under current circumstances.
PowerPoints:
This lesson is driven by a high end, attractive and informative power point, which has detailed instructions and notes, step-by-step animations, with starter(‘To do’), main and plenary activities, as well as home learning included.
Learning Outcomes:
Students will gain an understanding of how to:
Students will gain an understanding of the difference between Mock ups & Prototypes and what they are: Used for & Made of
Practical: Watch the animation, follow school health and safety guidance, measure, mark out and make mock up models!
Students consider ergonomics by testing and applying quality control to the mock up model throughout practical, to consider how a client with arthritis can hold their toothbrush more comfortably
Links to NEA
Lesson plan:
A Lesson plan is also included as a MS Publisher file. This explains the: learning outcomes, starter, main and plenary activities as well as resources required and homework.
Work sheets:
These are mainly PPT files, but the final evaluation is MS Publisher, which is differentiated in the form of sentence starters.
Please leave a positive review if you found these resources helpful, Thank You!
I have found that the Year 13 DT GCSE students need more direction in the research section and this needs to feed into their specification. Taking a more project management style approach so that everything is planned will hopefully guide students to be more independent in their own enquiry and result in far more meaningful outcomes for this section.
I thoroughly researched this, coming up with a massive bank of relevant subject specific vocabulary/questions/processes/techniques for helping students to get top marks in this section.
Learning outcomes:
In this A-level coursework task, Students will gain an understanding of:
How to plan, structure and complete (mainly primary) research in a timely manner
How to structure research so that it links excellently to their Specification, to get the highest possible mark
An outlined 3-step process to guide students to success in outlining, developing and planning their research independently.
Far more detailed lines of enquiry using ACCESS FM+ that students can use.
A discussion of two Project management strategies to use in planning research activities
A detailed discussion of 3 relevant Quality control processes that students really need to think about.
Potential learning outcomes:
Improvement and addition of information to the research section
This is the third part of two lessons (so far) dealing with section A that can be recorded on power point or paper, Pease look to the first resource here:
2021 AQA Product design NEA Section A
https://www.tes.com/teaching-resource/2021-aqa-product-design-nea-section-a-12414616
2021 AQA Product design NEA Brief & Specification & Project management for Section A (this links really closely to this resource as it deals with similar themes.)
https://www.tes.com/teaching-resource/2021-aqa-product-design-nea-brief-and-spec-12421572
I hope these help you and your students succeed!
Please add a positive review/some stars if you found this useful as this really helps; THANK YOU!
The learning concept:
The concept is that the acronym SCAMPER is used by each consecutive student to alter the last students’ design. I normally allow each student ten minutes per alteration. The students really enjoy this activity and it can be stretched to a 1 hour duration
Learning Outcomes:
In this lesson, students will gain an understanding of:
Different design movements
Free hand sketching as they can use other’s designs as a springboard for inspiration
Gain confidence in annotating each other’s designs
This will culminate in them drawing more complex combinations of these designs, which can then be judged by the student or peer assessed to describe the favourite design.
Students will also learn subject specific key words that will underpin their design and technology vocabulary.
Power point:
The attractive and visual power point can be used on the white board and also printed as a worksheet.
Printed as two worksheets, there is a blank and also a differentiated version where one idea is already started so that students do not struggle with ‘blank page syndrome’. This has first example models success criteria in the form of detailed annotation and a strong product design influenced by the example swatches on the left side of the page.
6 lesson ‘all in one’ prepared resource for graphic design lessons - included are:
• Lesson 1: Draw Squares & circles freehand
• Lesson 2: Draw in Oblique and Isometric projection
• Lesson 3: Render 3-D forms using tone
• Lesson 4: How to use colour and rendering in 3-D
• Lesson 5: How to label and annotate a design
• Lesson 6: Learn about flight, design and make a glider
A fun and engaging project where students will learn the basic principles of design,explore imaginative and original ways of designing, then they will create an original graphic design product.
The powerpoints have detailed step by step instructions and a great quantity of visual examples for a project that should take between 6 and 8 lessons and differentiated booklets that can be used by subject specialists and non-D&T teachers alike, perfect for cover work as well.
If you found this resource useful, please leave a positive review :) Thanks
Power point:
The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included.
A lesson plan is also included (MS Publisher file).
Learning Outcomes:
In this lesson, students will gain an understanding of:
• What is annotation and how Leonardo De Vinci used it?
• What are correct graphical layout conventions?
• How to communicate using clear labelling and annotation
• How to annotate using existing designs
• How to design a unique graphic product (badge) and then annotate their own designs
• Literacy: Students will also learn a lots of subject specific key words
Worksheets:
The worksheets are differentiated into two categories:
• ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc.
• The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.
Power point:
The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included.
A lesson plan is also included (MS Publisher file).
Learning Outcomes:
In this lesson, students will gain an understanding of:
• What is the difference between shape and form?
• To gain confidence in drawing and rendering, using light source, three tone shading and isometric projection.
• How to draw combinations of these shapes to create a realistic three dimensional drawing.
• Literacy: Students will also learn a range of subject specific key words
Worksheets:
The worksheets are differentiated into two categories:
• ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc.
• The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.
2021 AQA Product design NEA Brief & Specification & Project management for Section A
Worried about what to teach the Year 13 DT GCSE students in September 2020? This is the perfect resource to get them carrying on and enthused with a high quality power point, with relevant visuals and animations, as well as questions, techniques and directed tasks to get them finishing off Section A and really having a much better idea of how to carry on!
I thoroughly researched this, coming up with a massive bank of relevant subject specific vocabulary/questions/processes/techniques for helping students to get top marks in this section.
Learning outcomes:
In this A-level coursework task, Students will gain an understanding of:
How to plan, structure and complete a design brief that is relevant to their context, user and portfolio, guided by the mark scheme
How to structure their Specification and the importance of basing this on prior research, to get the highest possible mark
Highly detailed and searching questions to get students started on deep lines of inquiry in their specification – these questions are also designed to get them reflecting and improving on research that they have already undertaken. This could include: additional case studies, planning, life cycle and safety analysis.
The importance of QA and QC and understanding how these are important in the NEA and the wider industry.
A detailed discussion of 3 relevant Quality control processes that students really need to think about.
Which Project management strategy out of four is best to use to go forward?
Potential learning outcomes:
Next 3 to 4 slides/pages of NEA / Length – 1-2 lessons (including student activity)
Improvement and addition of information to the research section
This is the second part of two units (so far) dealing with section A that can be recorded on power point or paper, Please look to the first resource below…
https://www.tes.com/teaching-resource/2021-aqa-product-design-nea-section-a-12414616
and third resource here:
https://www.tes.com/teaching-resource/2021-aqa-nea-product-design-primary-research-12422264
I hope these help you and your students succeed!
Please add a positive review/some stars if you found this useful as this really helps; THANK YOU!
2021 AQA DT GCSE NEA Guide to Section E
This is the perfect resource for remote learning to get students enthused, confident and carrying on, with a high quality power point, with highly detailed guidance, examples, with relevant visuals and animations, techniques and directed tasks to get them finishing off Section F!
This is an extremely comprehensive resource that covers this entire section.
Learning outcomes:
In this GCSE coursework task, Students will gain an understanding of:
How the mark scheme translates into chunked analysis and evaluation tasks
Analysis and self- evaluation, client opinion and third party opinion that has occurred throughout the portfolio
How to create an index of this
How to evaluate the success of their final design against their original specification (section B)
How to write an evaluative summary of what they found out, based on questions for every section of an NEA, including research methods, Design Process, Mock ups/prototype stage, Manufacture process, CAD/CAM process, including testing and conclusion
How to structure their response in complex sentences, using P.E.E., supported by using differentiated materials in the form of sentence stems with clear success criteria.
Potential learning outcomes:
Next 3+ slides/pages of NEA / Length – 3 lessons (including student activity)
This is one of my 6 part TES units dealing with the 2021 GCSE NEA. Please look to the resources here for section A (first two), section B and a combination section C/D unit/power point as well as section E (which reflects the most recent changes to the marks scheme):
https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-e-12494870
https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-c-and-d-12477833
https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-a-12395717
https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-section-a-part-2-12401619
https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-b-12417046
I hope these help you and your students succeed!
Please add a positive review/some stars if you found this useful as this really helps; THANK YOU!
This is the perfect resource for remote learning. This will get students enthused, confident and carrying on independently, supported by a high quality power point, 1 and half hours of (private) YouTube tutorials, stunning visuals and animations, as well as relevant questions, techniques and directed tasks to get them finishing off Section C & D
This is an extremely comprehensive resource that covers 2 units.
Learning outcomes:
How the mark scheme translates into chunked creative tasks, including:
How to draw a really well annotated generated idea from section C, including scrap views and essential links back to Specification and Brief, discussing importance of clear annotation
How to draw rectangular prisms and ellipses in isometric projection, with a strong emphasis on rendering realistic textures to communicate information on choice of materials
How to go about the cardboard modelling aspect at home with recycled materials
How to develop design ideas of multifunctional prototypes on sketch up free – also how to create separate components such as drawers and even door knobs
How to draw orthographic projections of prototypes on sketch up free
How to draw exploded wireframe views of prototypes on sketch up free
How to draw cutting lists of prototypes on sketch up free and use MS Excel to create purchase lists
How to research relevant materials (components covered above) using tables and inspiration for testing the properties of materials
How to write a Manufacturing specification
Potential learning outcomes:
Next 4 - 5 slides/pages of NEA / Length – 4 - 5 lessons (including student activity)
This is one of my 5 part TES units dealing with the 2021 GCSE NEA. Please look to the resources here for section A (first two), section B and a combination section C/D unit/power point as well as section E (which reflects the most recent changes to the marks scheme):
https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-e-12494870
https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-c-and-d-12477833
https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-a-12395717
https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-section-a-part-2-12401619
https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-b-12417046
I hope these help you and your students succeed!
Please add a positive review/some stars if you found this useful as this really helps; THANK YOU!
Power point:
The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included.
A lesson plan is also included (MS Publisher file).
Learning Outcomes:
In this lesson, students will gain an understanding of:
• Of what are different types of three dimensional projection and drawing?
• Of how to draw isometric projection drawings, with 3 challenges including: basics shapes, more complex shapes, to a super challenge that is very hard!
• Of how to use a good quality of line drawing shapes in Isometric projection
• Of how to add three tone shading to make their 3-D drawings more realistic
• Literacy: Students will also learn a range of subject specific key words
• How to translate 3rd Angle orthographic to Isometric
• Literacy: Students will also learn a range of subject specific key words
Worksheets:
The worksheets are differentiated into two categories:
• ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc.
• The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.
This is an artist worksheet, that includes analysis questions about Van Gogh’s Bedroom in Arles - 1888. This is suitable for lesson, cover, home work or baseline assessment.
On this all in one sheet, there are boxes for students to:
copy and complete a Van Gogh image
write their answers in, discussing the style and life of the artist
Self/teacher assessment with WWW and EBI success criteria provided.
If you found this resource helpful, please leave positive comments, as this really helps. Thank you.
The rationale:
As D&T teachers return to school, we need a sit down/non-tool based project to start the students off, due to the Coronavirus.
This 6 x 1 hour lesson mini project is an ‘all in one’ prepared resource, containing lesson by lesson powerpoints and differentiated booklets that can be used by subject specialists and non-D&T teachers alike, perfect for cover work as well. The project ends with a sit down design and make lesson.
Powerpoints:
The project is driven by high end, attractive and informative power points, which have detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included.
Learning Outcomes:
This graphics project is aimed at Year 9 (13 year old) students, who will gain an understanding of how to:
• Lesson 1: Draw in 2 point perspective
• Lesson 2: Adding cast shadows in 2 point perspective
• Lesson 3: How to draw in Isometric P.2
• Lesson 4: 3rd angle orthographic translation from Isometric
• Lesson 5: How to design branding, typography and colour
• Lesson 6: Design and make a Point of Display using a NET
Project plan:
A scheme of work is also included as a MS Publisher file. This explains the: learning outcomes, starter, main and plenary activities as well as resources required and homework.
Booklets:
The booklets are differentiated into two categories:
• ‘LA’ Booklet having additional support in terms of the outcomes as well as sentence stems, word banks, etc.
• The second category of booklet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.
Attached is a Word document:
Learning objectives: Who is Margaret Calvert, what is a pictogram and what is important in a road sign?
Learning Outcome:
After learning about Margaret Calvert, students could consider what is the best, most simple and easy to understand pictograms to use for the following activities:
• Wear a mask! • Child walk with adult • Use safety goggles
• Slippery surface! • Don’t run! • No mobile phone in car!
The students draw and annotate these.
Please leave a positive review if you found helpful! I would really appreciate it!
LIVEN UP YOUR DISPLAYS!
This is a nice Yr 7 1 hour activity - all that is needed is colouring pencils and scissors as well as a4 paper trimmed in half into strips.
I also printed out and distributed the inspiration sheets - or have on board.
A nice cover or filler as well as the end of term!
Enjoy!